Siemens SIMOTICS CONNECT 400 - Making Settings in the Wizard

5 Commissioning the Router Kit WLAN / LTE
5.4 Configuring SCALANCE M876-4
Application example for SIMOTICS CONNECT 400 - Router KitInbetriebnahme- und Montagehandbuch 54
5.4.3 Making settings in the wizard
Procedure
62. Start the wizard.
63. In the "IP" tab, enter the IP address of the LTE module (192.168.1.1).
Figure 5-14 Entering the IP address of the LTE module
64. In the "SIM" tab, enter the PIN of the SIM card, remove the check mark for "Enable
Mobile Network Interface" and set the check mark for "Allow Data Roaming".
Figure 5-15 Entering the PIN of the SIM card