Siemens SIMOTICS CONNECT 400 Manual

5 Commissioning the Router Kit WLAN / LTE
5.3 Setting the IP address of the SCALANCE W774-1
Application example for SIMOTICS CONNECT 400 - Router KitInbetriebnahme- und Montagehandbuch 47
5.3 Setting the IP address of the SCALANCE W774-1
Note on the IP address of the SCALANCE W774-1
There is no IP address, because no IP address is set in the factory setting.
Settings in the PST
42. Open the PST.
Figure 5-5 PST start page
43. Select the "Set PG/PC Interface" command in the menu bar under "Settings".
Figure 5-6 Opening the "PG/PC Interface" settings

Siemens SIMOTICS CONNECT 400 Specifications

General

Brand	Siemens
Model	SIMOTICS CONNECT 400
Category	Control Unit
Language	English