Siemens SIMOTICS CONNECT 400 Manual

7 Commissioning the Router Kit LAN / LTE
7.3 Configuring SCALANCE M876-4
Application example for SIMOTICS CONNECT 400 - Router KitInbetriebnahme- und Montagehandbuch 89
8. Set the following properties in the "Internet Protocol Version 4 (TCP/IPv4) Properties"
dialog:
– Set the check mark for "Use the following IP address".
IP address: 192.168.1.10
(Fixed IP address of the adapter. You can also select any other IP address that is in
the address range of the LTE module.)
Default gateway: 192.168.1.1
(In general: The IP address of the LTE module is entered as default gateway)
– Set the check mark for "Use the following DNS server addresses".
Preferred DNS server: 192.168.1.1
(In general: The IP address of the LTE module is entered as preferred DNS server)
Figure 7-4 Entering Internet protocol properties
7.3 Configuring SCALANCE M876-4
7.3.1 Logging in to the Web-based Management Tool
Procedure
9. Commission the device.
10. To log in to the Web-based Management Tool, enter the IP address of the LTE module
(192.168.1.1) in the browser.

Siemens SIMOTICS CONNECT 400 Specifications

General

Brand	Siemens
Model	SIMOTICS CONNECT 400
Category	Control Unit
Language	English