6 Commissioning the Router Kit WLAN / LAN
6.4 Setting the IP address of the SCALANCE W774-1
Application example for SIMOTICS CONNECT 400 - Router KitInbetriebnahme- und Montagehandbuch 74
6.4 Setting the IP address of the SCALANCE W774-1
Note on the IP address of the SCALANCE W774-1
There is no IP address, because no IP address is set in the factory setting.
Settings in the PST
104. Open the PST.
Figure 6-16 PST start page
105. Select the "Set PG/PC Interface" command in the menu bar under "Settings".
Figure 6-17 Opening the "PG/PC Interface" settings
To Next Page
Loading...
