3/7 "Firmware". After commissioning, the rmware can then be automatically updated via
MindSphere. To do this, activate this function in the asset settings in "SIDRIVE IQ Fleet".
Requirements
• On your mobile device, allow access the "SIDRIVE IQ Cong" application memory.
• The connectivity module must be located in the same Wi-Fi network as is presently being
used by the mobile device.
• The Wi-Fi network allows communication between the participants, i.e. between the
connectivity module and the mobile device.
• Load the latest rmware version onto your mobile device.
Commissioning
6.2Commissioning with Android
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL 47
To Next Page
Loading...
