5. Exit step 7/7 using the "Next" button.
6. Finish commissioning with the "Commission" button.
Result
The further onboarding process is performed automatically. This process takes approximately
one minute. Successful completion of the onboarding process is conrmed.
After commissioning has been completed, you are automatically logged o from the device
and the Bluetooth connection is disconnected.
The connectivity module starts to record data and transfer data in the preselected intervals.
Commissioning
6.2Commissioning with Android
SIMOTICS CONNECT 400
72 Operating Instructions, 04/2023, A5E50161952B AL
To Next Page
Loading...
Need help?
General
