Siemens SIMOTICS CONNECT 400 - Page 78

Procedure
1. Open the "SIDRIVE IQ Con󹪝g" application.
2. Select an asset from the list.
3. Tap the
button to establish a connection.
4. Con󹪝rm the pairing request (Bluetooth) with the "Pair" button.
If the 󹪝rmware version installed on your connectivity module is < 0.6.0.0, you will need to
enter the Bluetooth pairing PIN for the Bluetooth pairing between the connectivity module
and "SIDRIVE IQ Con󹪝g".
For Bluetooth pairing with PIN input, follow the instructions in the following section.
Note
If an older 󹪝rmware version is installed on your connectivity module, we recommend
performing a 󹪝rmware update.
Commissioning
6.3Commissioning with iOS
SIMOTICS CONNECT 400
76 Operating Instructions, 04/2023, A5E50161952B AL