then updates the associated motor information. Only assign the connectivity module to the
motor on which it is mounted.
Note
In addition to motor monitoring, from V1.0.2.0, "Generic Vibration monitoring" can be set. Using
this function, additional components of the drive train can be monitored, for example, gearbox,
coupling, pillow block bearing, pump, fan, compressor as well as other rotating and non-rotating
parts.
Commissioning
6.3î™ Commissioning with iOS
SIMOTICS CONNECT 400
90 Operating Instructions, 04/2023, A5E50161952B AL
To Next Page
Loading...
