10.4 Stator and rotor
Image 10-1 Stator and rotor 1G.5, 1H.5, shaft heights 500 to 630
Table 10-1 Spare parts stator and rotor 1G.5, 1H.5, shaft heights 500 to 630
No. Designation No. Designation
8.00 Rotor, complete 20.00 Terminal box
8.10 Shaft 24.10 Brush spindle
8.31 Balancing ring, non-drive end 24.11 Brushholder stud with brushholders and carbon brushes
8.60 Commutator 24.20 Carbon brushes
10.02 Stator frame with main and commutating
coil resistors
24.31 Box-type brushholder
10.15 Fixing lug for grounding 24.37 Tandem coil-spring brush holder
10.60 Louvered cover 24.50 Brush holder
10.74 Cover with seal 24.60 Single-acting clamping shoes for brush holder
10.75 Cover with seal 24.65 Fixing lugs for brush spindle
10.84 Cover with seal 24.68 Clips for brushholder
10.85 Cover with seal
Spare Parts
10.4 Stator and rotor
SIMOTICS DC 1GG5
Operating Instructions 02/2016 105
To Next Page
Loading...
