Siemens SIMOTRAS 6SG7050 - Transmission of Double-Word Connectors for Technology and Communication Modules

01.04 Start-up
SIEMENS AG 6SG7000-0BA76 7-55
SIMOTRAS HD Operating Instructions
7.10.8 Transmission of double-word connectors for technology and
communication modules
In the receive direction, the values of two adjacent connectors (K) are combined to form a single
double-word connector (KK) (e.g. K3002 and K3003 to KK3032). These double-word connectors
can themselves be connected to other function blocks in the usual way. For details of how to
connect double-word connectors, see Section 9.1, subsection, " The following rules apply to the
selection of double-word connectors ".
In the transmit direction, a double-word connector is applied by entering the same double-word
connector in two contiguous indices of the selection parameter.
Example:
.04
.01
.03
.02
U734
32
9498
9498
401
K0032
KK9498
KK9498
K0401
Word
L-Word
Word
H-Word
2x the same KK - number
.04
.01
.03
.02
U734
32
9498
9499
401
K0032
KK9498
KK9499
K0401
Word
H-Word
Word
H-Word
2 different KKs !