01.04 Description
SIEMENS AG 6SG7000-0BA76 3-13
SIMOTRAS HD Operating Instructions
3.5 Applicable standards
VDE 0106 Part 100
Arrangement of operator control elements in the vicinity of components/parts at hazardous voltage
levels.
VDE 0110 Part 1
Insulation coordination for electrical equipment in low-voltage installations.
Requirement for reliable isolation ⇒ degree of pollution 2 for boards and power section.
Only non-conductive pollution occurs. Occasional conductivity due to moisture condensation must,
however, be expected.
”Moisture condensation is excluded, as the components are only permitted for humidity class F."
VDE 0113 T1
Electrical equipment on industrial machines (where applicable).
VDE 0160 Section 5.3.1.1.2 and 5.3.1.1.3, EN 50178
Regulations for equipping electrical power systems with electronic equipment.
Use of cables and insulated wiring in electrical power systems.
EN61000-4-2 and EN61000-4-4
Noise immunity
DIN IEC 60068-2-6 acc. to severity grade 12 (SN29010 Part1)
Mechanical stressing
3.6 Abbreviations
2
nd
CB Communications board
PKW Parameter ID value
PZD Process data
TB Technology board
ZSW Status word
NC not connected
To Next Page
Loading...
