Siemens SIMOTRAS 6SG7050 - Ordering Information for Options Using Codes

01.04 Type spectrum
SIEMENS AG 6SG7000-0BA76 2-3
SIMOTRAS HD Operating Instructions
2.2 Ordering information for options using codes
SIMOTRAS HD converter order no. with
suffix Z and
codes (several codes together) and/or
plaintext (if required)
Options Codes Order No.
Terminal expansion module (CUD2) K00 6RX1700-0AK01
Operation of SIMOTRAS HD converter at temperatures of
65°C
H78
DriveMonitor PC - PMU (RS232) connecting cable, 3m 6SX7005-0BA00
User-friendly operator control panel (OP1S) 6SE7090-0XX84-2FK0
AOP1 adapter for mounting OP1A in cubicle door, including
5m connecting cable
6SX7010-0AA00
PMU-OP1S connecting cable, 3m 6SX7010-0AB03
PMU-OP1S connecting cable, 5m 6SX7010-0AB05
LBA Local bus adapter for the electronics box
LBA is always needed to install supplementary boards
(see Section 5.2.2)
6SE7090-0XX84-4AH0
ADB Adapter board
ADB is always needed to install CBC, CBP, EB1, EB2,
SBP and SLB boards
6SE7090-0XX84-0KA0
EB1 Terminal expansion board
5)
(miniature-format board; LBA + ADB required)
6SX7010-0KB00
EB2 Terminal expansion board
5)
(miniature-format board; LBA + ADB required)
6SX7010-0KC00
CBP2 Communications board with interface for SINEC- L2-
DP, (PROFIBUS)
1) 5)
(miniature-format board; LBA + ADB required)
6SX7010-0FF05
T300 Technology board
3) 4)
can only be used in temperatures of up to 50°C
(not with H78 option)
6SE7090-0XX87-4AH0
Pulse encoder (retrofit)
(2 x 250 pulses/revolution, 15V supply voltage)
6SG7000-2AC15
Operating Instructions for SIMOTRAS HD
Operating instructions in German 6SG7000-0BA00
Operating instructions in English D76 6SG7000-0BA76
Operating Instructions and DriveMonitor in all the above
languages available on CD-ROM
D64 6SG7000-0CD00
6SG7 Z0