Introduction
1.2 Adapting the frequency inverter to the particular application (parameter assignment for entry-level
personnel)
Frequency inverter
10 Operating Instructions, 08.10. 2008, t.b.d.
1.2 Adapting the frequency inverter to the particular application (parameter
assignment for entry-level personnel)
1.2.1 General basics
Parameterizable frequency inverters transform standard motors into variable-speed drives
Frequency inverters are parameterized to adapt them to the motor being driven so that this
can be optimally operated and protected. This is realized using one of the following operator
units:
● Keyboard and display unit (Operator Panel) that is snapped onto the frequency inverter.
● Software (STARTER commissioning tool) that allows the frequency inverter to be
parameterized and controlled from a PC.
Frequency inverters are especially used to improve and expand the starting and speed
response of motors.
Many standard applications can function with the default parameters
Although frequency inverters can be parameterized for very specific applications, many
standard applications can be configured by means of just a few parameters.
Use the factory settings (where possible)
For basic applications, commissioning can be carried out using just the factory settings (see
Section "Commissioning with factory settings").
Use quick commissioning (for simple, standard applications)
In the majority of standard applications, commissioning can be carried out by entering or
changing just a few parameters during quick commissioning (see "Section "Commissioning
with Operator Panel").
To Next Page
Loading...
