Functions
5.11 Operation in fieldbus systems
Frequency inverter
Operating Instructions, 08.10. 2008, t.b.d.
173
Integrating the frequency converter in a higher-level SIMATIC controller
All settings required for integrating the frequency converter in the SIMATIC controller are
carried out in STEP 7 with HW Config.
Creating the STEP 7 project and configuring SIMATIC 300
The procedure here is very similar to that described for PROFIBUS. The main differences
are:
1. In the module catalog, choose a PROFINET-capable S7 controller (e.g. CPU 315-2
PN/DP).
2. Once you have added the SIMATIC 300, create a PROFINET network.
Figure 5-28 Add SIMATIC 300 station with the PROFINET network
To Next Page
Loading...
