Functions
5.2 Inverter control
Frequency inverter
90 Operating Instructions, 08.10. 2008, t.b.d.
Table 5- 9 Parameterizing the function
Parameter Description
P0700 = 2 Controls the motor using the digital inputs of the frequency inverter
P0727 = 2 Three-wire control, method 1
P0701 = 1 The enable signal to power-up the motor is issued with digital input 0
Further options:
The enable signal can be issued with any other digital input, e.g. with digital input 3
via P0704 = 1
P0702 = 2 CW rotation is activated with digital input 1
Further options:
CW rotation can be activated with any other digital input, e.g. with digital input 3 via
P0704 = 2
P0703 = 12 CCW rotation is activated with digital input 2
Further options:
CCW rotation can be activated with any other digital input, e.g. with digital input 3
via P0704 = 12
To Next Page
Loading...
