Communication via EtherNet/IP
4.7 The inverter as an Ethernet station
Fieldbuses
Function Manual, 04/2018, FW V4.7 SP10, A5E34229197B AE
105
Additional options of integrating inverters into Ethernet
You also have the option of integrating the inverter into Ethernet using Proneta or STEP7, for
example.
Here is the example of the "Edit Ethernet station" screen form from Step 7, which you can
use to make the required settings.
You can find the required settings for the inverter as Ethernet node in The inverter with
PROFINET interface as Ethernet node. (Page 70).
To Next Page
Loading...
