Siemens SINAMICS G120P Function Manual

Communication via EtherNet/IP
4.5 Supported objects
Fieldbuses
88 Function Manual, 04/2018, FW V4.7 SP10, A5E34229197B AE
4.5
Supported objects
Overview
Object class
Object name
Objects re-
quired
ODVA objects
SINAMICS
objects
hex
dec
1 hex
1
Identity object
x
4 hex
4
Assembly Object
x
6 hex 6 Connection Management Object x
28 hex
40
Motor Data Object
x
29 hex
41
Supervisor Object
x
2A hex
42
Drive Object
x
32C hex
812
Siemens Drive Object
x
32D hex
813
Siemens Motor Data Object
x
F5 hex
245
TCP/IP Interface Object
1)
x
F6 hex
246
Ethernet Link Object
1)
x
300 hex
768
Stack Diagnostic Object
x
x
302 hex
770
Adapter Diagnostic Object
x
x
303 hex
771
Explicit Messages Diagnostic Object
x
x
304 hex
772
Explicit Message Diagnostic List Object
x
x
401 hex
1025
Parameter object
x
x
1)
These objects are part of the EtherNet/IP system management.
Identity Object, Instance Number: 1 hex
Supported services
Class
•
Get Attribute all
•
Get Attribute single
Instance
•
Get Attribute all
•
Get Attribute single
•
Reset
Table 4- 3 Class Attribute
No.
Service
Type
Name
1
get
UINT16
Revision
2
get
UINT16
Max Instance
3
get
UINT16
Num of Instances

Siemens SINAMICS G120P Specifications

General

Frequency Range	0 Hz to 550 Hz
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Relative Humidity	5% to 95% (non-condensing)
Voltage Range	200 V to 240 V, 380 V to 480 V, 500 V to 690 V
Output Voltage	0V to input voltage
Control Type	Vector control, V/f control
Protection Class	IP20, IP55
Communication Interfaces	PROFIBUS, PROFINET, Modbus RTU
Cooling Method	Air cooling
Altitude	Up to 2000 m without derating
Power Range	0.37 to 630 kW