Siemens SINAMICS G120P Function Manual

Fieldbuses
Function Manual, 04/2018, FW V4.7 SP10, A5E34229197B AE
3
Preface
About this manual
This manual describes the settings and preconditions that are required to communicate with
a higher-level control system with the subsequently listed fieldbus systems.
Fieldbuses for SINAMICS G120
● PROFIBUS DP
● PROFINET
● EtherNet/IP
● USS
● Modbus RTU
● CANopen
Additional fieldbuses for SINAMICS G120P
● BACnet MS/TP
● P1
Additional fieldbuses for SINAMICS G110M
● AS-Interface
Changes in this edition
Inverter settings are described in the context of the Startdrive PC commissioning tool. The
descriptions for settings using STARTER have been removed.
What is the meaning of the symbols in the manual?
Reference to further information in the manual
Download from the Internet
DVD that can be ordered
End of a handling instruction.
❒

Siemens SINAMICS G120P Specifications

General

Frequency Range	0 Hz to 550 Hz
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Relative Humidity	5% to 95% (non-condensing)
Voltage Range	200 V to 240 V, 380 V to 480 V, 500 V to 690 V
Output Voltage	0V to input voltage
Control Type	Vector control, V/f control
Protection Class	IP20, IP55
Communication Interfaces	PROFIBUS, PROFINET, Modbus RTU
Cooling Method	Air cooling
Altitude	Up to 2000 m without derating
Power Range	0.37 to 630 kW