20624 HANDWH_CHAN_STOP_COND EXP, C09 H1, P1
- Definition of response of handwheel travel, channel-specific DWORD PowerOn
-
808d-me42 - 0x13FF, 0x13FF,
0x13FF, 0x13FF,
0x13FF, 0x13FF,
0x13FF, 0x13FF...
0 0x1FFFF 2/2 M
808d-me62 - 0x13FF, 0x13FF,
0x13FF, 0x13FF,
0x13FF, 0x13FF,
0x13FF, 0x13FF...
0 0x1FFFF 2/2 M
808d-te42 - 0x13FF, 0x13FF,
0x13FF, 0x13FF,
0x13FF, 0x13FF,
0x13FF, 0x13FF...
0 0x1FFFF 2/2 M
808d-te62 - 0x13FF, 0x13FF,
0x13FF, 0x13FF,
0x13FF, 0x13FF,
0x13FF, 0x13FF...
0 0x1FFFF 2/2 M
808d-mte40 - 0x13FF, 0x13FF,
0x13FF, 0x13FF,
0x13FF, 0x13FF,
0x13FF, 0x13FF...
0 0x1FFFF 7/2 M
808d-mte60 - 0x13FF, 0x13FF,
0x13FF, 0x13FF,
0x13FF, 0x13FF,
0x13FF, 0x13FF...
0 0x1FFFF 7/2 M
Description: Definition of the response for handwheel travel to channel-specific VDI interface
signals (bit 0 to bit 7) or CP-SW limit stop or stop by an OEM application (bit 7):
Bit = 0:
Interruption or collection of the displacements entered via the handwheel.
Bit = 1:
Traversing canceled and no collecting.
Bit assignment:
Bit 0: Mode group stop
Bit 1: Mode group stop, axes plus spindle
Bit 2: NC stop
Bit 3: NC stop, axes plus spindles
Bit 4: Feedrate disable (exception for MD30460 $MA_BASE_FUNCTION_MASK bit6)
For bit 4 feed disable, it must be taken into account that a PLC-controlled axis,
for
which MD30460
$MA_BASE_FUNCTION_MASK bit 6 = 1, is not stopped by the feed disable,
and that no interruption and no cancellation are triggered here.
Bit 5: Feedrate override
Bit 6: Rapid traverse override
Bit 7: Feedrate stop, geometry axis or CP-SW limit stop or stop by an OEM application
Bit 8 = 0:
The maximum feedrate for handwheel travel of geometry axes is that specified in
machine data JOG_AX_VELO for the corresponding machine axis/axes.
Bit 8 = 1:
The maximum feedrate for handwheel travel of geometry axes is that specified in
machine data MAX_AX_VELO for the corresponding machine axis/axes.
Bit 9 = 0:
The override is active during handwheel travel of geometry axes.
Machine data
3.3 Channel-specific machine data
Parameter Manual
168 List Manual, 01/2017
To Next Page
Loading...
