1101 USER_TOOL_CHG_MANUAL_MA - -
- Tool change step MM+ BOOLEAN Immediately
-
- - 1 0 1 3/3 U
Description: Tool change increment MM+:
If the value is 1, input of a tool or cutting edge number is permissible.
1102 CYC_TOOLNO_EDTMODE_MANUAL_MA - -
- Input mode T no. in the cycle screen forms MM+ BOOLEAN Immediately
-
- - 1 0 1 3/3 U
Description: Input mode T no. in the cycle masks MM+:
0: No T no. input by the operator. T no. is automatically created from SGUD.
>=1: T no. input by the operator
1103 TAPPINGCYCLE_MODE_MANUAL_MA - -
- Preselection cycle type for thread tapping MM+ BOOLEAN Immediately
-
- - 1 0 1 3/3 U
Description: Preselection of cycle type on tapping MM+:
With compensating chuck without compensating chuck
0 CYCLE840 CYCLE840
1 CYCLE840 CYCLE84
>=2 CYCLE840 not possible
1104 TOOL_CHG_MANUALMODE_MA - -
- Enable tool change in the jog function of the MM+ BOOLEAN Immediately
-
- - 1 0 1 3/3 U
Description: Tool change enable in the JOG function of the MM+
1105 STARTUP_WITH_MMP - -
- Automatic start of the MM+ after power on BOOLEAN PowerOn
-
- - 1 0 1 3/3 U
Description: Automatic start of MM+ after power ON
1106 SOFTKEY_CENTRE_ADJ - -
- Softkey text is adjusted BOOLEAN PowerOn
-
- - 1 0 1 3/3 U
Description: Text on the softkeys is justified
1107 AX_LOAD_DISPL - -
- Activate axis utilization display BOOLEAN Immediately
-
- - 1 0 1 3/3 U
Description: Activate axis utilization display
Machine data
3.1 Display machine data
Parameter Manual
List Manual, 01/2017 23
To Next Page
Loading...
Need help?
General
