If no, the new value is entered.
At the cost of the required time, writing of a variable value
can therefore be designed very memory-efficiently.
Changing of the data can shorten/increase the time requirement of the present
application.
Changing of the data can fill the available log buffers faster/more slowly.
Frequent occuring of alarm 15120 -> Increase values for index=0,1,2.
The value indicating the index to be changed can be deducted from the parameter of
alarm 15120:
Index Meaning
0 Search depth in preprocessing buffer
1 Search depth in buffer for data changes within the range of tool change
2 Search depth in buffer for data changes of main processing (especially
synchronized actions)
17900 VDI_FUNCTION_MASK EXP, N09 H1
- Setting to VDI signals DWORD PowerOn
-
808d-me42 - 0x0 0 0x1 0/0 S
808d-me62 - 0x0 0 0x1 0/0 S
808d-te42 - 0x0 0 0x1 0/0 S
808d-te62 - 0x0 0 0x1 0/0 S
808d-mte40 - 0x0 0 0x1 7/2 M
808d-mte60 - 0x0 0 0x1 7/2 M
Description: Settings for VDI signals:
Bit 0 == 0:
The VDI signals motion command + / motion command - are already issued if there is a
travel request (default).
Bit 0 == 1:
The VDI signals motion command + / motion command - are issued only if the axis
actually moves.
17950 IS_AUTOMATIC_MEM_RECONFIG EXP, N02 -
- System: automatic memory reconfiguration BOOLEAN PowerOn
-
- - TRUE - - ReadOnly S
Description: Value = 0 : If machine data that redefines the buffered memory is modified, then
generally the alarm 4400 is output which indicates that the user data will be deleted
the next the software is started.
Value = 1 : If machine data that redefines the buffered memory is modified, then
generally the alarm
4400 is not output. This means the data is retained the next time
the software is started.
The preassigned value is selected model-specifically and generally it must not be
changed.
17951 AUTOMATIC_MEM_RECONFIG_FILE EXP -
- Path and file name for internal data backup STRING PowerOn
-
- - /siemens/sinumerik/
sys_cache/nck/
content.reconfig
- - ReadOnly S
Machine data
3.2 General machine data
Parameter Manual
List Manual, 01/2017 91
To Next Page
Loading...
