Siemens SINUMERIK 840DE SL - Page 1437

Commissioning the system
1.2 User administration
PCU-Basesoftware (IM8)
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
17
"HMI" tab
Figure 1-5 "HMI" tab
Table 1- 3 The default is marked in "
bold
".
"HMI" tab
Option
Effect
Keys Filtering
Enable
"yes"
Key filtering is activated.
"no" Key filtering not activated.
Filter file
E:\WINDOWS\System.ini
Select the file with filter settings
Program
Start:
"yes"
The HMI program is started.
"no"
The HMI program is not started.
File:
F:\hmisl\siemens\sinumerik\
hmi\autostart\run_hmi.exe
Select the HMI program
Task bar autohide:
"no"
HMI program: Hide start task bar
"yes"
HMI program: Show start task bar
Task bar on top:
"no"
HMI program: Start task bar in the
background
"yes"
HMI program: Start task bar always visible