Siemens SIRIUS 3RW50 - Page 138

Functions
7.9 Test with small load
SIRIUS 3RW50 soft starter
138 Manual, 09/2019, A5E35628455002A/RS-AA/001
Setting options
The execution of the test mode function "Test with small load" is possible as follows:
● 3RW5 HMI High Feature
Access protection to 3RW5 HMI High Feature is not active or has been reset.
Menu: "Parameters > Soft Starter > Additional parameters"
● With SIRIUS Soft Starter ES (TIA Portal) via the local interface on the
3RW5 HMI High Feature
● With a fieldbus via a 3RW5 communication module (only via a 3RW5 PROFINET or
PROFIBUS communication module):
– With SIRIUS Soft Starter ES (TIA Portal) Premium
– Configuration software of the control system (e.g. STEP 7 with corresponding HSP)
– User program
Parameter
Parameter
Description
Activate test with small load The 3RW50 soft starter switches to the test mode function
"Test with small load".
Deactivate test with small load The test mode function "Test with small load" is terminated. The
3RW50 soft starter exits the test mode and switches back to the
parametrized operating mode.