Siemens SIRIUS 3RW50 - Monitoring the Process Image of the 3 RW50 Soft Starter with the 3 RW5 HMI High Feature

Functions
7.12 3RW5 HMI High Feature
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001
149
7.12.1.3 Monitoring the process image of the 3RW50 soft starter with the
3RW5 HMI High Feature
Operating principle
The process image input (PII) contains current information about the soft starter and process
state. The process image output (PIQ) contains current control commands to the
3RW5 soft starter. The control command states of the control source, which has control
priority according to the operating mode controller, are entered in the data memory of the
process image output.
Requirements
● 3RW5 HMI High Feature
Menu: "Monitoring > Process image"
Display of the process images
In the process image input (PII) and process image output (PIQ), you can see which bits of
the process image are active or inactive:
Checkbox
Status
Bit
inactive 0
active 1