Mounting and dismantling
3.4 Connecting the 3RW5 HMI
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001
65
3.4.6 Removing and installing the hinged cover of the 3RW50 soft starter
Requirements
● Hinged cover
Procedure
● Unlock the hinged cover on both sides ① / ②.
● Open the hinged cover
③ at an angle of approx. 20°.
● Loosen the hinges horizontally to the soft starter surface
④ / ⑤ starting from the left.
● Take the cover off the 3RW50 soft starter.
● Follow the steps in reverse order to install the replacement hinged cover.
To Next Page
Loading...
