Mounting and dismantling
3.4 Connecting the 3RW5 HMI
SIRIUS 3RW50 soft starter
64 Manual, 09/2019, A5E35628455002A/RS-AA/001
Procedure
● Observe the coding of the plug and socket ①.
● Lock the connector in the socket
②.
● The HMI connecting cable in the cable duct of the 3RW5 HMI High Feature may only be
routed downward.
Make sure that you install the cable in accordance with EMC requirements. For example,
route data cables separately from the motor cable. Connect both sides of shielded cables
over a large surface area.
● Insert the push-in lugs into each side of the enclosure until you hear them engage ① and
fix the 3RW5 HMI High Feature on the wall
② / ③.
To Next Page
Loading...
