Siemens SIRIUS 3RW50 - Overview of Leds on Standard 3 RW5 HMI

Messages and diagnosis
8.2 LED display
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001
165
8.2.4 Overview of LEDs on Standard 3RW5 HMI
Device LEDs (RN, ER, MT)
The display of the device LEDs of the 3RW5 HMI Standard (Page 141) shows the status
summary for the following devices:
● 3RW50 soft starter
● 3RW5 communication module (if there is one)
Please note that the display of the device LEDs of the 3RW5 HMI Standard does not have to
correlate with the display of the device LEDs of the 3RW50 soft starter.
Status LED
The display on the status LEDs of the 3RW5 HMI Standard (Page 141) indicates the state of
the 3RW50 soft starter and the operating state of the motor.
Status
LED
Status of the soft starter
Motor operating state
Lights up
green
Operation The ramp up time comes to an end and the motor
is running.
Flashes
green
Starting or stopping time active Motor is ramping up or ramping down.
Further information
You will find more information on the messages of the 3RW50 soft starter in the Chapter
Status and error displays (Page 163).
You will find more information on the messages of the 3RW5 communication module in the
manual for the 3RW5 communication module in question.