Messages and diagnosis
8.11 Logbooks
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001
183
8.11 Logbooks
Operating principle
The logbook lists events, warnings, and faults in chronological order. Each entry is stamped
with the real time. For the 3RW50 soft starter there are the following logbooks:
● Logbook application
● Logbook device
The logbook is designed as a circular buffer.
Display and editing options
● 3RW5 HMI High Feature
Menu: "Diagnosis > Soft Starter > Logbook"
● With SIRIUS Soft Starter ES (TIA Portal) via the local interface on the
3RW5 HMI High Feature
● With a fieldbus via a 3RW5 communication module (only via a 3RW5 PROFINET or
PROFIBUS communication module):
– With SIRIUS Soft Starter ES (TIA Portal) Premium
– Configuration software of the control system (e.g. STEP 7 with corresponding HSP)
Logbook application
The logbook application contains all messages relating to functions and parameters. This
logbook is only available in the 3RW50 soft starter. The logbook application can be deleted
with the command "Delete logbook application – xy".
Logbook device
The following messages are recorded in the device logbook:
● Error
● Warnings
● Event
The device logbook is available in every module (3RW50 soft starter,
3RW5 HMI High Feature, 3RW5 communication module) and cannot be deleted.
Saving logbooks
● The logbooks can be stored on a micro SD card (Page 157).
To Next Page
Loading...
