Siemens SIRIUS 3RW50 - 8.9 Execute HMI diagnostics with the 3 RW5 HMI High Feature

Messages and diagnosis
8.9 Execute HMI diagnostics with the 3RW5 HMI High Feature
SIRIUS 3RW50 soft starter
178 Manual, 09/2019, A5E35628455002A/RS-AA/001
8.9 Execute HMI diagnostics with the 3RW5 HMI High Feature
Requirements
● 3RW5 HMI High Feature
Menu: "Diagnosis > HMI"
Parameter
Diagnostic value
Comment
Diagnosis state
Shows all active diagnostic messages.
Self-test Test LEDs The device LEDs of the 3RW5 HMI High Feature
are tested one after the other. The display shows
which device LED is currently being controlled.
Navigate through the test operation with the OK
key.
Test buttons The 3RW5 HMI High Feature keys are tested one
after the other. The display shows which keys
must be actuated in sequence in order to perform
the test.
Test display The 3RW5 HMI High Feature runs a color
program on the display. Navigate through the test
operation with the OK key.