Siemens SIRIUS 3RW50 - Parameter assignment; 5.1 Setting elements on 3 RW50 soft starter

SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001
91
Parameter assignment
5
5.1 Setting elements on 3RW50 soft starter
①
Scale of rated operational current I
e
of the motor
②
Stopping time
③
MODE key
• Parameterization of RESET MODE
• Deactivation / activation of Soft Torque
• Parameterization of ON / RUN relay output
• Parameterizing mode
• Restoring factory setting
④
RESET / TEST key
• Acknowledges faults
• Performing the self-test (user test)
• Parameterization of ON / RUN relay output
• Parameterizing mode
• Restoring factory setting
⑤
CLASS setting for the motor overload protection
⑥
Rated operational current I
e
of the motor
⑦
Current limiting factor as a multiple of the set rated operational current I
e
of the motor
⑧
Ramp up time
⑨
Starting voltage