Siemens SIRIUS 3RW50 - 4.8 Connecting the control terminals (spring-type terminals)

Connecting
4.8 Connecting the control terminals (spring-type terminals)
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001
81
4.8 Connecting the control terminals (spring-type terminals)
Requirements
● Observe the conductor cross-sections and tightening torques in the data sheet or on the
front beneath the hinged cover.
● Pay attention to the required tools indicated on the front beneath the hinged cover.
Procedure
DANGER
Hazardous voltage.
Will cause death or serious injury.
Turn off and lock out all power supplying this device before working on this device.
Example circuits
● Control by pushbutton (Page 206)
● Control by switch (Page 207)
● Switching with the control supply voltage (Page 208)
● Control by PLC (Page 210)
● Actuation of a line contactor (Page 211)
● Wiring for remote RESET (Page 213)
● Connecting the temperature sensor (Page 214)
● Connecting the evaluation unit to the analog output (Page 215)