Glossary
SIRIUS 3RW50 soft starter
234 Manual, 09/2019, A5E35628455002A/RS-AA/001
Process image
Image of the signal states of the digital inputs and outputs in the memory of a controller.
The process images can be transferred as follows:
● Cyclically in the fieldbus protocol
● Acyclically using data sets
Remote RESET
"Remote RESET" means that faults are acknowledged by switching the control supply
voltage off and on again. The control supply voltage on the 3RW50 soft starter must be
switched off for at least 4 s.
STS
Simulation Tool for Soft Starters
The soft starter can be configured with the STS (Simulation Tool for Soft Starters) software.
The STS suggests suitable soft starters for the application based on the motor and load data
and application requirements that you enter.
To Next Page
Loading...
