Siemens SIRIUS 3RW50 - Page 31

Description
1.10 Accessories
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001
31
Functions
● Language selection
● Starting and stopping the motor via control keys
● Local interface
● Display of error diagnoses as plain-text messages
● Display of up to 5 measured values at the same time
● Analog output and ON / RUN relay output can be parameterized with the
3RW5 HMI High Feature.
● Setting communication parameters of 3RW5 communication modules:
– PROFINET (device name and IP parameters)
– PROFIBUS (station address)
– EtherNet/IP (IP parameters)
– Modbus RTU (station address)
– Modbus TCP (IP parameters)
● Backup of parameterization data on a micro SD card
● The display of the device LEDs of the 3RW5 HMI High Feature shows the messages of
the following devices:
– 3RW50 soft starter
– 3RW5 HMI High Feature
– Communication module (if there is one)
● Firmware updates can be performed using the 3RW5 HMI High Feature and a
micro SD card for the following devices (Performing firmware update with micro SD card
(3RW5 HMI High Feature) (Page 188)):
– 3RW50 soft starter
– 3RW5 HMI High Feature
– Communication module (if there is one)