Mounting and dismantling
3.4 Connecting the 3RW5 HMI
SIRIUS 3RW50 soft starter
60 Manual, 09/2019, A5E35628455002A/RS-AA/001
Procedure with door mounting kit IP65
● Remove the protective film from the adhesive tape on the seal and secure the seal on the
rear side of the 3RW5 HMI High Feature
①.
Ensure that the seal does not overlap.
● Place the 3RW5 HMI High Feature in the cutout of the control cabinet door
②.
To Next Page
Loading...
