Siemens SIRIUS 3RW55 - Page 170

Setting options
• 3RW5 HMI High Feature
Menu: "Parameters > Soft Starter > Parameter set 1 / 2 / 3 > Motor protection > Temperature
sensor"
Access protection to the 3RW5 HMI High Feature is not active or has been reset.
• With SIRIUS Soft Starter ES (TIA Portal) via the local interface on the 3RW5 HMI High Feature
Brief overview: Window "Project Navigation" with current project under created Soft Starter >
"Parameters" > Window "Work area" > "Soft Starter > Parameter set 1 / 2 / 3 > Motor protection"
• With a 󹪝eldbus via a 3RW5 communication module:
– With SIRIUS Soft Starter ES (TIA Portal) Premium / Professional (only via a 3RW5 PROFINET
or PROFIBUS communication module)
Brief overview: See SIRIUS Soft Starter ES (TIA Portal) via the local interface on the
3RW5 HMI High Feature
– Con󹪝guration software of the control system (e.g. STEP 7 with corresponding HSP)
– User program
You can 󹪝nd additional information on the parameters that can be set via the 󹪝eldbus in the
manual of the respective 3RW5 communication module.
Parameters
WARNING
Automatic restart following fault acknowledgment/restart.
Can cause death or serious injury.
The 3RW55 and 3RW55 Failsafe soft starters immediately continue to operate with the values
speci󹪝ed by the control following error acknowledgment / restart. Outputs are activated when
the ON condition is met.
Take appropriate measures to prevent unintentional restarting and to ensure a de󹪝ned start of
the system.
Functions
8.3 Motor protection
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
170 Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006