Siemens SIRIUS 3RW55 - Diagnostics Options; LED Display; Messages and Diagnostics; Overview of the Device Leds on the 3 RW55 and 3 RW55 Failsafe Soft Starters

Messages and diagnostics
9
9.1 Diagnostics options
The 3RW55 and 3RW55 Failsafe soft starters provide you with the following diagnostic options:
• LEDs on the 3RW55 or 3RW55 Failsafe soft starter
• 3RW5 HMI High Feature
• SIRIUS Soft Starter ES (TIA Portal) (accessories) via local interface on the 3RW5 HMI High
Feature
Brief overview: Window "Project Navigation" with current project under created Soft Starter >
"Commissioning" > Window "Work area" > "Soft Starter / HMI > Diagnosis"
Further diagnostics options
You will 󹪝nd further diagnostics options via the 󹪝eldbus in the manual for the respective
3RW5 communication module.
9.2 LED display
9.2.1 Overview of the device LEDs on the 3RW55 and 3RW55 Failsafe soft starters

0
① RUN (green) Indicates whether the 3RW55 or 3RW55 Failsafe soft starter is ready for
operation.
② ERROR (red) Indicates whether there is an error.
③ MAINTAINANCE (yel‐
low)
Indicates whether a message is present.
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006 247