Example of trace data
Additional information
Further information on the trace function can be found in the online help for the SIRIUS Soft
Starter ES (TIA Portal).
8.19 Test mode
Operating principle
The 3RW55 and 3RW55 Failsafe soft starters must be in test mode for the test mode
functions "Test with small load" (Page 222) and "Simulation" (Page 224) In test mode, the "RN"
LED ashes green on the 3RW55 or 3RW55 Failsafe soft starter. The 3RW55 and 3RW55 Failsafe
soft starters must be in Normal operation mode to enable normal operation.
The parameters "Test mode" and "Normal operation" are not available in the 3RW5 HMI High
Feature.
Functions
8.19 Test mode
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006 221
To Next Page
Loading...
