EasyManua.ls Logo

Siemens SIRIUS 3RW55 - Control by PLC; Control Circuit Connection

Siemens SIRIUS 3RW55
366 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A.2 Control circuit connection
A.2.1 Control by PLC
Requirements
3RW55 or 3RW55 Failsafe soft starter (the example shows the 3RW55 soft starter with a
Standard circuit)
Parameterization required
WARNING
Automatic restart.
Can cause death or serious injury.
If a starting command is pending, a restart will be triggered automatically after the reset. This
particularly applies if the motor protection has tripped. Dangerous states of the system can
result.
Reset the start command (e.g. via the PLC or switch) before performing a reset.
To do this, for example, link the group error output (terminals 95 and 96) into the control.
Example circuits
A.2 Control circuit connection
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006 299

Table of Contents

Other manuals for Siemens SIRIUS 3RW55

Related product manuals