Siemens SIRIUS 3RW55 - Design and Operator Controls of the High Feature 3 RW5 HMI

6.6 Design and operator controls of the High Feature 3RW5 HMI










① Display
② Device LEDs (Page 247)
③ Navigation keys
④ Cable duct
⑤ Plug-in connection for HMI connecting cable
⑥ Master RESET key
⑦ OK key
⑧ ESC key
⑨ Motor stop key
⑩ Motor start key
⑪ Function selection key
⑫ Eyes for lead seals
⑬ Hole for mounting the interface cover
⑭ Status LED (Page 249)
⑮ Local interface (point-to-point connection between PC and 3RW5 HMI High Feature)
⑯ Slot for micro SD card (Page 243)
Navigating and setting
The keys are used for navigation, for selecting and setting menu items and for executing
prede󹪝ned actions.
Key Actions
• Move one position to the right in the input 󹪝eld
• Displaying and switching over graphs. You will 󹪝nd more information in chapter Graphical display of measured
values on the 3RW5 HMI High Feature (Page 229).
• Move one position to the left in the input 󹪝eld
• Switching over graphs. You will 󹪝nd more information in chapter Graphical display of measured values on the
3RW5 HMI High Feature (Page 229).
Parameter assignment
6.6 Design and operator controls of the High Feature 3RW5 HMI
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
98 Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006