Assembly procedure
Illustration similar
• Plug the new box terminal block into the main circuit connections ①.
5.7 Connecting the control terminals (screw terminals)
Requirements
• Observe the conductor cross-sections and tightening torques in the data sheet or on the front
of the 3RW55 or 3RW55 Failsafe soft starter beneath the hinged cover.
• Note the required tools indicated on the front of the 3RW55 or 3RW55 Failsafe soft starter
beneath the hinged cover.
Procedure
DANGER
Hazardous voltage.
Will cause death or serious injury.
Turn o and lock out all power supplying this device before working on this device.
Connecting
5.7 Connecting the control terminals (screw terminals)
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
80 Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006
To Next Page
Loading...
