Siemens SIRIUS 3RW55 - Page 219

Setting options
• 3RW5 HMI High Feature
Menu: "Parameter > Soft starter > Date and time"
Access protection to the 3RW5 HMI High Feature is not active or has been reset.
• With SIRIUS Soft Starter ES (TIA Portal) via the local interface on the 3RW5 HMI High Feature
Brief overview: Window "Project Navigation" with current project under created Soft Starter >
"Parameters" > Window "Work area" > "Soft Starter > Date and time"
• With a 󹪝eldbus via a 3RW5 communication module:
– With SIRIUS Soft Starter ES (TIA Portal) Premium / Professional (only via a 3RW5 PROFINET
or PROFIBUS communication module)
Brief overview: See SIRIUS Soft Starter ES (TIA Portal) via the local interface on the
3RW5 HMI High Feature
– Con󹪝guration software of the control system e.g. STEP 7 with corresponding HSP
– User program
You can 󹪝nd additional information on the parameters that can be set via the 󹪝eldbus in the
manual of the respective 3RW5 communication module.
Procedure
1. Select the menu item "Edit time".
2. Set the current time.
3. Select the menu item "Edit date".
4. Set the current date.
Parameters
Parameters Description
Edit time Sets the current time
Time format
• 12 h (default)
• 24 h
Time o󹪜set Di󹪜erence to UTC time zone: UTC +/- 12 h (in steps of at least
30 minutes)
Display time The time is shown in the display of the 3RW5 HMI High Fea‐
ture.
• Yes
• No (factory setting)
Edit date Sets the current date
Format of date
• Day.Month.Year
• Day/Month/Year (factory setting)
• Year-Month-Day
Functions
8.17 Setting the date and time
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006 219