Siemens SIRIUS 3RW55 - Page 260

Diagnostic value Description
Factory settings restored
Faulty parameter number
Parameter set 1 active
Parameter set 2 active
Parameter set 3 active
Parameter set change not possible
Motor heating active
1)
DC braking active
1)
Dynamic DC braking active
1)
Type of motor connection standard
Type of motor connection inside delta
Type of motor connection unknown
Main power rotation right
Main power rotation left
Output 1 active
Output 2 active
Output 3 active
Output 4 active
Output 1 - Time active
Output 2 - Time active
Output 4 - Time active
1)
Ready to start for motor ON
Thermal motor model deactivated
Switching element cooling time active
Automatic mode
Operating mode manual - bus
Manual operation bus - PC controlled
Operating mode manual - local
Manual operation local - Input controlled
Manual operation local - HMI controlled
Manual operation local - PC controlled
Manual operation bus - web server controlled
Automatic operation - Input controlled
FW update rejected
FW update active
FW update successful
Operation / bypass active
Start pause pending
Energy saving mode active
Normal operation active
Test mode active
Start condition not ful󹪝lled
2)
Start condition ful󹪝lled
2)
Messages and diagnostics
9.6 Performing diagnostics on the 3RW55 and 3RW55 Failsafe soft starters using the 3RW5 HMI High Feature
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
260 Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006