• Language selection
• Starting and stopping the motor via control keys
• Local interface
• Display of error diagnoses as plain-text messages
• Display of up to 5 measured values at the same time
• Setting communication parameters of 3RW5 communication modules:
– PROFINET standard (device name, IP parameters and other communication parameters)
– PROFINET High Feature (device name, IP parameters and other communication
parameters)
– PROFIBUS (station address and other communication parameters)
– Modbus TCP (IP parameters and other communication parameters)
– Modbus RTU (station address and other communication parameters)
– EtherNet/IP (IP parameters and other communication parameters)
• Backup of parameterization data on a micro SD card
• The display of the device LEDs of the 3RW5 HMI High Feature shows the messages of the
following devices:
– 3RW55 or 3RW55 Failsafe soft starter
– 3RW5 HMI High Feature
– Communication module (if there is one)
• Firmware updates can be performed using the 3RW5 HMI High Feature and a micro SD card
for the following devices:
– 3RW55 or 3RW55 Failsafe soft starter
– 3RW5 HMI High Feature
– Communication module (if there is one)
Note the information in chapter Firmware update (Page 22).
Description
3.4 3RW5 HMI High Feature
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006 29
To Next Page
Loading...
