Procedure with IP65 door mounting kit
• Remove the protective lm from the adhesive tape on the seal and secure the seal on the rear
side of the 3RW5 HMI High Feature ①.
Ensure that the seal does not overlap.
• Place the 3RW5 HMI High Feature in the cutout of the control cabinet door ②.
Mounting and dismantling
4.4 Installing, mounting and removing the 3RW5 HMI High Feature
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
66 Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006
To Next Page
Loading...
