Siemens sitrans PROBE LU - Programming via Handheld Programmer; Activating Program Mode; Navigation and Edit Modes

A5E32337695 SITRANS Probe LU (HART) – OPERATING INSTRUCTIONS Page 11
Installation
Installation
Mounting Location
Recommendations:
• Ambient temperature within –40 to 80
o
C (–40 to 176
o
F).
• Easy access for viewing the display and programming via the handheld programmer.
• An environment suitable to the housing rating and materials of construction.
• Keep the sound path perpendicular to the material surface.
.
WARNINGS:
• SITRANS Probe LU is to be used only in the manner outlined in this
manual, otherwise protection provided by the equipment may be
impaired.
• Installation shall only be performed by qualified personnel and in
accordance with local governing regulations.
Notes:
• Refer to the device nameplate for information on approvals.
• This product is susceptible to electrostatic shock. Follow proper grounding
procedures.
• Ideally, mount SITRANS Probe LU so that the face of the transducer is at least 300
mm (1 ft) above the highest anticipated level.
process temperature
–40 to 85
o
C (–40 to 185
o
F)
ambient temperature
surrounding enclosure
–40 to 80
o
C (–40 to 176
o
F)
flange adaptor (option)
customer-supplied
flange