Siemens ST750 - Page 55

Mobility and Logistics, Traffic Solutions
Sopers Lane, Poole, Dorset, BH17 7ER
Security classification
Error! Unknown document
property name.
Page
55 of 73
Version 008
Status
Released
Last Editor Nathan Fearnhead
Date
16/06/2017
Document Name Configuration Control
Document No.
667/CC/32750/000
Copyright © Mobility 2017. All Rights Reserved. Mobility is a division of Siemens Plc
The Gemini/Detector Swing Frame is made up of two components which need ordering
independently, depending on required configuration. Figure 63 and Figure 64 below show more
detail.
667/1/33770/000
(Item 1)
This GEMINI AND DETECTOR SWING FRAME
ASSEMBLY can only have the Gemini² or Stratos
Outstation unit installed.
NOTE: The Gemini² / Stratos Outstation Unit is
installed using the mounts indicated.
If Detector Cards are required a DETECTOR
MOUNTING BRACKET ASSEMBLY (P/N
667/1/33775/000), see below, will need to be
ordered in addition.
Figure 63
667/1/33775/000
(Item 2)
This DETECTOR MOUNTING BRACKET
ASSEMBLY is to be used in addition with the
GEMINI AND DETECTOR FRAME ASSEMBLY
(above) for the two following configurations:
1. Gemini² / Stratos Outstation Unit AND up
to 4 Detectors.
2. Up to 4 Detectors Only.
Figure 64
2
1