Siemens Synco 200 - Page 96

9.2.5 Settings
Path: SET
Setting values
Display Name Range Factory setting
SETCOOL Economy
cooling
setpoint
Comfort cooling setpoint to
250 °C
28 °C
SETCOOL Comfort
cooling
setpoint
Comfort heating setpoint to
Economy cooling setpoint
24 °C
SETHEAT Comfort
heating
setpoint
Economy heating setpoint to
Comfort cooling setpoint
21 °C
SETHEAT Economy
heating
setpoint
−50 °C to Comfort heating
setpoint
19 °C
Path: … > PARA > CTLOOP 1
Display Name Range Factory setting
SETCLIM Cooling setpoint
limitation
-50.0…250 °C 0 °C
SETHLIM Heating setpoint
limitation
-50.0…250 °C 250 °C
This setting can only be made on controller 1 in basic type A.
Note
96 / 174
Siemens Universal Controllers RLU2… CE1P3101en
Building Technologies Controller (CTLOOP x) 29.08.2008