23
Cancelling Auto Arm
If your system is programmed to arm automatically,
you can manually turn off this feature.
Resetting the time and date (page 29) automatically
cancels auto arming.
1. Enter code to access the interactive menus.
2. Enter the number of the area in which you want
to cancel the auto arming.
3. Press
1
for Set Arm Time.
4. Press
CLR 0
to erase the default number of
minutes (10) before auto arming goes into effect,
then press
ENTR
.
5. Repeat Steps 2-4 to cancel auto arming in other
areas, or press
ENTR
t
o exit.
6. Press
ENTR
to return to the normal display
.
*Note: This feature is not available with toggle systems.
What Happens
The next automatic arming of the system will be
cancelled.
Bypassing Zones
Bypassing a zone means temporarily turning off
protection to a part of your building. This enables
you to access that zone and still protect the other
areas in your building. You may also need to bypass
a zone if you have a Not Ready condition that cannot
be immediately corrected. (See page 36 for
information about not ready conditions.) You
should not bypass fire or other 24-hour zones.
You can press
1 STAT
to see what zones are
available in each area.
Toggle Method
To see what zones are already bypassed, press the
BYPS
button.
1. Press the number of the zone to bypass.
2. Press
BYPS
.
To Next Page
Loading...
Need help?
General
