3
tests, upload/download software changes, and add or
delete users to the system.
Note: Your installation company representative can
tell you how to perform these functions.
Installer Code
(Highest Privilege Level)
Your system installer uses this code to install and
initially program your system. It provides access to
all system functions, both from the touchpads and
from the central station (through the telephone lines).
If you do not want the installation company to have
access to your system once it has been installed, ask
the installer for the installation code and instructions
for changing it. Once you change the code, only you
can arm and disarm the system. If you need to
change the programming of your system, you will
have to give the installation company the new code.
Talk to your installer; there are many reasons why
you might want your installation company to be able
to access your system at any time.
To Next Page
Loading...
Need help?
General
