5
Touchpad Buttons
For operating an access controlled
door.
Activates/deactivates interior zones.
Used to bypass individual zones and
to check which zones have been
bypassed.
Displays event history. This key is
typically used only by your system
installer.
Enables Code 2 users to arm or
disarm the system.
Silences alarm/trouble sounds at
speakers and touchpads. In the
interactive menu system, the LCD
indicates whether it will silence all
areas or the area that you are in.
Also exits some menus.
Controls whether or not a chime tone
will sound when someone enters a
Chime zone while the system is
disarmed.
Erases a mistake made while
entering a code or command.
Toggles zone status between delayed
and instant. When the system is
armed and the NO DELAY LED is
on, zones programmed for entry and
exit delay will be instant.
Police key. If enabled through
programming, transmits an alarm to
the central station for dispatching the
police. This key must be held for
one full second.
To Next Page
Loading...
Need help?
General
